Top Safety Gear for Hydraulic Hose Replacement in Fall River

Hydraulic Safety Gear in Fall RiverWhenever you work with a hydraulic system, it is important to exercise caution whenever you perform hydraulic hose replacement and other hydraulic hose services. Custom Fall River hydraulic hoses and hydraulic hose assemblies can be obtained at Metro Industrial & Marine Supply, but you should also make sure that you have the proper safety gear when you need to replace worn hoses or perform inspections. You also need to know what you’re doing with regard to hydraulic hose replacement. Make sure that you get all of the training and support you need before you attempt to work on or with hydraulic equipment.

Must-Have Safety Gear

While it might seem like safety is being over-stated with regard to your Fall River hydraulic hoses, the truth is that when it comes to working with a hydraulic system, safety should be your number one priority. Whether you need to replace worn hoses or if you are merely performing an inspection, you should at least use the following safety gear to protect yourself during the process. However, it should be noted that a high-pressure fluid leak is a completely different situation. Protective gear can only do so much in this type of situation. Make sure that the equipment is deactivated and depressurized before disconnecting any lines or working on any part of the system.

Best safety gear for working around hydraulic equipment includes:

  • eye and face protection – appropriate goggles rated for this type of work
  • foot and leg protection – safety shoes or boots that are slip-proof and rated for this type of work
  • hand protection – chemical and liquid resistant gloves should be used
  • body protection – depending on the equipment being serviced, additional full body protection may be warranted
  • other protection – use any other protective gear recommended by your employer, the equipment manufacturer, or that meet OSHA safety requirements

Follow the Plan to Replace Worn Hoses

Your employer should have a procedure manual or list for deactivating equipment and depressurizing the system before hydraulic hose replacement. Make sure that the engine is stopped and that hydraulic pressure is safely relieved before disconnecting any lines or performing any type of hydraulic hose services. Keep ALL body parts away from the area of a suspected leak, as even a pinhole leak can cause considerably bodily damage and injury. The leak may not be visible or apparent, so do not search around for the leak with your hands. Safety recommendations include using a long object, such as a piece of wood, steel, or even cardboard in the path of any fluid stream to detect the leak. Do not touch any part of the system when it is pressurized.

When purchasing new Fall River hydraulic hoses to replace worn hoses, make sure to get the right size and type that is properly rated for the pressure, fluid, and use of the hydraulic hose assembly. One way to do this is to work with a professional service provider for hydraulic hose replacement. Metro Industrial & Marine Supply provides made-to-order custom hydraulic hose and hydraulic hose assemblies for our customers in the Greater Fall River area. We go above and beyond to meet or exceed your expectations, offering same-day services on most of our custom hydraulic hoses. We can even create custom hose assemblies while you wait, ranging from low pressure to ultra-high pressure, 1/4 ” ID to 2″ ID, four spiral, crimp fittings, steel, brass, stainless steel, plus US and metric ends, all designed to meet your needs and provide you with the exact hoses you require to get the job done right.

Hydraulic Hose Services in Fall River

Once you get the right materials for hydraulic hose replacement, make sure that you follow all OEM recommendations for the fluid that you will be using. Always use high-quality hydraulic fluid and avoid any contamination by keeping the hoses and connectors clean. Even just a tiny bit of contamination could result in early failure of your hydraulic system. If a valve contains built-up contaminants, it will eventually cause it to fail. Everything must be clean and properly prepared before you replace worn hoses with new ones. Do everything you can to ensure safety throughout this process for yourself, co-workers, and any passersby who might be negatively impacted by hydraulic hose services.

To learn more about our hydraulic hose services or to ask about hydraulic hose replacement for your professional equipment, contact Metro Industrial & Marine Supply in New Bedford, Massachusetts by calling 508-996-8400. We provide a wide range of services, including hydraulic lines and assemblies made-to-order, for customers throughout the SouthCoast region and beyond.