Skip to content

Hydraulic Hose Safety Tips for Greater Fall River Businesses

Learning how to safely replace hydraulic hoses on industrial or commercial equipment and machinery is essential to create a safe working environment for everyone involved. Whether you are in the manufacturing, construction or agriculture business, the more safety tips for hydraulic hoses that you can learn, the better it will be for you and your employees. Make sure to purchase new hoses through our dependable and high-quality Fall River hydraulic services for best results. We can create custom hydraulic hose assemblies “while you wait” and provide additional hydraulic hose services for customers throughout the Southcoast region.

Identify the Hose to Replace

You might know that there is a fluid leak on a particular piece of equipment, but finding the offending hose can sometimes be difficult. If it is not obvious, make sure that you follow all safety requirements and guidelines set by OSHA and the manufacturer’s recommendations. If you do not have the owner’s manual, see if you can contact the company direct for support. All of the information concerning the safe replacement of hydraulic hoses and components should be kept in a safety binder for employees to use when ordering Fall River hydraulic services.

Some tips for identifying the source of the leak include:

  • never touch the hose to find the source of the leak with your hands or any other body parts
  • always wear safety gear whenever you need to deal with hydraulic machinery
  • observe where the fluid is dripping and follow the trail with your eyes to locate the source
  • if necessary, use cardboard, paper or hydraulic leak detection fluid for hydraulic hose safety

Determine What is Needed for Hydraulic Hose Services

Take a look at the equipment to determine the components that need to be removed so you can replace the damaged hose. Whenever you take things apart, consider labeling the component so it will be easier to put back together when you get the new parts. Hydraulic hose safety is extremely important, as the damage caused by improperly installed hoses and accessories can be very serious. Not just to the equipment itself, but also to the operator, other employees, and visitors to the job site or place of business.

Some of the parts that may need to be removed and possibly replaced, depending on the damage or condition of the machinery, can include guards, housings, hydraulic cylinders, clamps, and even other hoses. All of these items are available at Metro Industrial & Marine Supply at our New Bedford, MA location.

Before you remove anything, check to see if the hydraulic component that is served by the hose that needs to be replaced has a live load or weight on it. If there is any type of pressure whatsoever, it could blow out forcefully the moment that the fittings are loosened for removal, which could cause serious injuries. If a hose came loose and whipped around inside of the machine, a lot of damage could have occurred that you might not be aware of until everything is opened up for inspection.

Make Sure You Have All the Tools Ready

If this is your first time performing hydraulic hose services on this equipment or if it has been a while since you have done this type of work, take time to make sure you have all the tools you need to complete the job. This is one of many very helpful safety tips for hydraulic hoses. The fittings on each end of the hose can be removed with a wrench. The size of the wrench needed can vary widely, so make sure you have the right size. When it comes to Greater Fall River hydraulic services, the more you know about the equipment and how it works, the easier it will be to get the job done.

If the fittings on the hose are designed to turn or swivel as they operate you will need two wrenches for hydraulic hose safety. One will be used to hold the stationary side of the coupling, and the other will be used to prevent it from turning. If you do not get a good grip on the couplings when removing these parts, it could cause damage when you try to separate the other coupling to perform hydraulic hose services.

Contact Metro Industrial & Marine Supply by calling 508-996-8400 directly to speak with one of our technicians about your needs for hydraulic hoses, hydraulic hose assemblies, components, clamps, and hydraulic hose safety gear. We proudly serve clients all over the Southcoast area, across the country, and around the globe.

Scroll To Top